Resistance of supersulfated cement to strong sulfate solutions

One of the principal uses of supersulfated cement has been for structures exposed to sea water and sulfate bearing ground waters. The resistance to such environments has been related to the absence of calcium hydroxide and the combination of much of the free alumina into ettringite during hydration. This paper reports the resistance of SSC to sulfate solutions in which ettringite has been decomposed. Prism samples were subjected to initial water storage at 25°C for both 28 days and 6 months. Samples were also cured for 6 months at 95°C and at both 11% and 100% R.H. The control samples of 28 days were compared with the 6 months samples of a more mature undecomposed SSC paste. After curing the prisms were measured and all the samples were immersed in three sulfate solutions (0.7M Na₂SO₄ , 0.7M MgSO₄ and saturated CaSO₄), and water at the same time. Measurements of linear expansion over 6 months were carried out. Core and surface material following immersion was examined by DTG and XRD. The study indicated that SSC is resistant to sodium and calcium sulfate solutions. Strong magnesium sulfate solutions decomposed the samples under all conditions. A possible mechanism for this attack is suggested. This revised version was published online in July 2006 with corrections to the Cover Date.     

Influence of Some Aggressive Media on Corrosion Resistance of Mortars With Spent Cracking Catalyst

The influence of spent catalyst from catalytic cracking in fluidized bed on the hydration process of cement and the properties of cement mortars were studied. The spent catalyst was used as an additive to cement in the mortars (10 and 20% of cement). The samples of mortars kept in water for28 days, then they were placed in sulfate and chloride media for 2 months (the control samples were kept in water for 3 months). After this time they were subjected to bending strength and compressive strength determinations. Thermogravimetric and infrared absorption studies were performed and capillary elevation, capability of binding heavy metals, and changes in mass and apparent density were determined too. The studies disclosed the pozzolana nature of spent catalyst and its influence on cement mortars being in contact with corrosive media. This revised version was published online in August 2006 with corrections to the Cover Date.     

La0.8Sr0.2Ga0.8Mg0.2O3与La0.8Sr0.2Ga0.8Mg0.15Co0.05O3电导的对比

采用固相合成法制备了La0.8Sr0.2Ga0.8Mg0.2O3(LSGM8282)和La0.8Sr0.2Ga0.8Mg0.15Co0.05O3 (LSGMC5), 利用四电极交流阻抗法和Hebb-Wagner 极化法对比研究了两种材料的总电导率和电子电导率. 实验结果表明, LSGM8282 的总电导率与氧分压无明显依赖关系, 而LSGMC5 的总电导率在高氧分压区随氧分压降低而增加,在中等氧分压区域基本保持不变. 在973-1173 K的温度范围内, LSGM8282的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和1/4.在1073-1173 K的温度范围内, LSGMC5的自由电子电导率以及电子空穴电导率的氧分压级数分别为-1/4和约为1/8, 表明LSGMC5的空穴产生机制可能与LSGM8282不同. LSGM8282 的氧离子电导率与氧分压无关, 而LSGMC5 的氧离子电导率在高氧分压区随氧分压的减小而增加.     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

Normalized Dynamic Characterization and Application of Multiple Heat Storage Materials Based on Standard Thermal Resistance北大核心CSCD

基于标准热阻和能量流法,推导出储热材料与换热流体的瞬态换热热阻,通过类比电路分析法,获得了储热-换热过程的瞬态热量流模型及动态响应时间常数。进一步引入节点温度,重新定义换热热阻,获得了储热与换热过程耦合的三阶电路瞬态热量流模型,求解得到了加热、储热和释热三类时间常数,可用于协同表征储热材料中储热与释热的快慢程度,从而实现了多类储热材料的归一化动态表征。通过数值模拟验证与应用对比分析,发现基于多时间常数的归一化动态模型用于表征储热材料的动态特性是可行的,可直接对不同换热、储热材料进行对比分析。案例分析发现与固体储热材料换热时,液态金属的动态换热能力优于熔融盐,而相比于水蒸气和CO₂,空气与陶瓷材料换热能更快达到稳态。     

白藜芦醇分子的转动惯量和电偶极矩

通过分子轨道理论和杂化轨道理论推断出较稳定的白藜芦醇分子是平面型分子,然后根据白藜芦醇分子结构特点计算了该化合物的一种稳定异构体的转动惯量,用矢量合成法计算了其电偶极矩,为微波辅助白藜芦醇萃取理论研究提供转动惯量和电偶极矩的数据.     

Accounting for the Adsorption of Anions When Interpreting the Mechanism of Electrodeposition of Metals from Complex Electrolytes: The Reaction Order by the Electrochemically Active Ion

The relationship between the current and the bulk concentration of complex ions during concurrent specific adsorption of an electrochemically active complex ion and a complexing ligand is considered. The effect of parameters that characterize adsorption of such ions and the structure of the electrical double layer on this relationship is analyzed.__________Translated from Elektrokhimiya, Vol. 41, No. 7, 2005, pp. 817–822.Original Russian Text Copyright © 2005 by Rogozhnikov.     

单一稀土Ce, La和混合稀土在工业纯铝中的作用

通过对比实验的方法，研究了稀土Ce，La和混合稀土对工业纯铝组织、电性能和机械性能的影响。结果表明：单一稀土La，Ce可降低工业纯铝的电阻率，提高工业纯铝的导电性，其中La的效果优于Ce．而混合稀土对电阻率几乎无影响；La，Ce和混合稀土均能减小工业纯铝的晶粒度，在其加入量为0．1％后细化效果明显，当其含量大于0．5％后细化效果趋于平缓，其中Ce的效果最佳，La次之，混合稀土最弱；单一稀土La，Ce在一定含量时可提高工业纯铝的σb6和δ，Ce的作用强于La，混合稀土对σb和δ的影响不明显。     

钇提高YT14硬质合金耐磨性的机制

研究了不同Ｙ添加量对ＹＴ１４硬质合金显微组织、结构和耐磨性的影响。结果表明，在ＹＴ１４硬质合金中添加微量Ｙ，可显著提高合金的耐磨性。Ｙ的主要作用是均匀细化碳化物相和Ｃｏ相；提高Ｃｏ粘结相中Ｗ、Ｔｉ元素的固溶量及αＣｏ相所占的体积分数，从而提高Ｃｏ粘结相的强韧性；Ｙ在合金中形成Ｙ２ＷＯ６，表明Ｙ还可还原和清除碳化钨表面氧化膜，增强Ｃｏ粘结相与硬质相之间的结合强度     

Amino acid overproduction by analog resistant mutants of the nitrogen fixing cyanobacteriumAnabaena sp 287

Two amino acid analog resistant mutants of the cyanobacteriumAnabaena sp 287 were isolated after MNNG mutagenesis.Anabaena ST 16, a mutant resistant to the alanine analog D-α-aminobutyric acid andAnabaena ST 25, another mutant resistant to the histidine analog l,2,4-triazole-3-alanine, released alanine and histidine, respectively, into the medium upon immobilization in alginic acid during diazotrophic growth in fluidized bed reactors. The rates of amino acid production by the mutants were 4.3 μmol mg chl^-1 h^-1 of D-alanine byAnabaena ST 16 and 16.6 μnol mg chl^-1 h^-1 of L-histidine byAnabaena ST 25. Nitrogen fixation by the mutants was not affected by the extracellular amino acid concentration. While the radioactive carbon flow was followed, the parent strain retained 93% of fixed¹⁴C and released only 7% into the medium. On the other hand,Anabaena ST 16 released 13% andAnabaena ST 25 released 29% into the medium. These mutants are beneficial in the production of radioactive amino acids using diazotrophic photobiotechnology.